Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the BMW X7

Model: BMW X7 MK 1, G07 - Years 2018-2026
Part: Battery

In this guide, we will go over the main instructions that will allow us to disassemble and replace the battery of the BMW X7 vehicle. First, let's open the rear trunk hatch and begin by removing the luggage compartment shelf; underneath, we will find the battery cover, which we will remove to access it, as shown in the video. At this point, let's disconnect both battery terminals (positive and negative) in order to remove it; we will replace it with a new one of the right type and with the same amperage, making the connection and starting the engine!

Posted on 26 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the key battery in BMW X7
How to replace the key battery in BMW X7
BMW X7 (2018-2026 / MK 1, G07) If you want to replace the battery inside the smart key of your BMW X7 yourself, all you have to do is read the following guide carefully and put the…
How to replace the cabin air filter of the BMW X7
How to replace the cabin air filter of the BMW X7
BMW X7 (2018-2026 / MK 1, G07) If you own a BMW X7 and are curious to discover how to correctly replace the cabin air filter, then all you need to do is carefully read the followin…
How to reset the service light on the BMW X7
How to reset the service light on the BMW X7
BMW X7 (2018-2026 / MK 1, G07) To reset the warning light on a BMW X7 vehicle, we need to: - turn on the car's instrument panel; - press the BC button, located on the left lever of…

Other guides you may be interested in

Adjusting the Handbrake on a Ford Ecosport

First, remove the plastic trim at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to unclip it. There is no need to remove it completely; just move it forward to avoid obstruction. Now remove the central plastic console around the handbrake, starting from the rear to unclip it and lifting it until the handbrake lever passes through. Again, it is not necessary to remove it entirely, but be careful with the connected cables, as it can be placed in front of the passenger seat. At this point, notice that at the base of the handbrake lever, on the front side, there is a nut. By acting on it with a 10mm spanner, you can adjust the handbrake force, increasing it by turning the nut clockwise or decreasing it by turning it anti-clockwise. Once adjusted, you can reposition the central console first by applying slight pressure to clip it back in, and then the trim at the base of the gear lever.

Watch the video!


by ScegliAuto

More videos