Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Adhesive Cover of the Interior Handle on a BMW 3 Series

Model: BMW Serie 3 F31, F30 - Years 2012-2019
Part: Handle

Today, learn how to replace the adhesive cover of the interior handle on a BMW 3 Series yourself. To perform this simple task, get inside the vehicle and close the door of the front handle where you want to perform the procedure. Remove the cover using a flathead screwdriver wrapped in a microfiber cloth. After removing the cover, clean the area and insert the new one. Push the new cover into the handle, and once it is secure, open the door. You can follow the same steps on a BMW 1 Series vehicle.

Posted on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the door handle of the BMW 3 Series
How to replace the door handle of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) These short and simple instructions will show us the process of disassembling and replacing the interior handle of the front door of the BMW 3 Series…
How do you replace the interior door handle on the BMW 3 Series?
How do you replace the interior door handle on the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In order to replace the interior handle of the BMW 3 Series, it is necessary to remove the glossy molding that is located along the entire panel and …
How to replace the interior door handle of the BMW Series 3.
How to replace the interior door handle of the BMW Series 3.
BMW Serie 3 (2012-2019 / F31, F30) Today we will explain how to independently replace the interior door handle of a BMW Series 3. To carry out the replacement of the handle, we need to…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos