Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X3
    4. : Replacement fendi fog BMW X1

BMW X3 - Video tutorial

Model: BMW X3 F25, MK 2 - Years 2010-2017
Part: Fog lights
Operation: Replacement fendi fog BMW X1

The replacement of the fog lights is essential in case of wear or opacification, to make the car lighting efficient again. As shown in the video, check the fog lights and the position of the locking levers, using a small flat screwdriver, operate the old fog lights until they come out. Observe the electrical connection and then disconnect it. Take the new fog light, check that it is identical to the previous one, check the position of the block, connect the electrical connection and place it in its housing Repeat the same operations for the other fog light and finally test for correct operation.


Posted on 15 November 2023 by ScegliAuto



How to replace the fog light on a BMW X3
BMW X3 (2010-2017 / F25, MK 2) Using a small slotted screwdriver, we start by unclipping the clips that secure the fog light to the car. Once we have released the upper clip, we wi
How to replace the fog light on the Bmw X3
BMW X3 (2010-2017 / F25, MK 2) In this video we see how to replace the burned out fog light on the BMW X3 F25. Let's proceed, with the help of a screwdriver, to disassemble the fog
How do you replace the cabin filter of the BMW X3?
BMW X3 (2010-2017 / F25, MK 2) In order to replace the cabin filter of the BMW X3, you need to open the hood so that you can access the components in the upper part of the engine c

    Frequently Asked Questions

    • X3 2010-2017 - How do you remove the fog light on the BMW X3? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos