Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the timing belt on a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years 2005-2013
Part: Timing belt

Let's see the disassembly and replacement of the timing belt on a BMW 3 Series. We open the bonnet and lift it, let's put it in safety. We remove the central plastic lining with the socket wrench; disconnect the power supply cables with pliers. With a fixed wrench we go to loosen the belt tensioner roller and remove the belt from its seat. With a socket wrench we go to unscrew the tightening pin of the belt tensioner roller, remove the water pump. We assemble the new water pump, the belt tensioner and the belt itself, we tighten everything with the socket wrench. We mount the trim with the locking pins.

Posted on 25 January 2020 by ScegliAuto

Video tutorial

Related tutorials

How to replace the timing belt of the BMW 3 Series
How to replace the timing belt of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) The replacement of the timing belt is a maintenance operation that can be carried out independently. To perform this operation on a BMW 3 Series, we …
How to replace the timing belt of the BMW 3 Series
How to replace the timing belt of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) The replacement of the timing belt of the BMW 3 Series is necessary when the first noises start or when we reach the limit of kilometers traveled. Th…
Guide to replacing the timing chain of the BMW 3 Series
Guide to replacing the timing chain of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Today we will discover the information that will allow us to disassemble and replace the timing chain of the BMW 3 Series, with engine code N20. The …

Other guides you may be interested in

How to Remove the Fuel Pump on Toyota Verso

Let's see how to remove the fuel pump on a Toyota Verso. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; unscrew the securing screws of the metal cap and remove it. Wrap the entire perimeter of the metal panel with paper or an absorbent cloth, then, using a screwdriver and hammer, unscrew the large bolt around the pump. Disconnect the power terminals and the fluid circulation tubes. Extract the fuel pump. To reassemble, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos