Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Replacement shaft pulley shaft pulley bolt mitsubisci

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Engine
Operation: Replacement shaft pulley shaft pulley bolt mitsubisci

If after starting the engine you hear a loud noise, an accentuated squeak, coming from the front of the engine, it means that the rubber damper element in the center of the crankshaft pulley is giving way: this is a very common defect. different motorizations of the Bavarian house, and it is even possible to arrive at the yielding and detachment of the pulley itself; before proceeding with the disassembly, it is suggested to take note of the passages that the auxiliary belt makes between the various pulleys, then loosen the tensioner to remove the belt and proceed with the disassembly of the pulley fixing pin by accessing from below; we will proceed backwards for the installation of that one taking care to choose a quality product, for example Corteco.


Posted on 28 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 2012-2019 - What are the problems with the Bmw 318d 143hp engine? Read Answer
    • Serie 3 2012-2019 - What's the problem with the BMW 316d? Read Answer
    • Serie 3 2012-2019 - What problems can the BMW 316 d F31 have? Read Answer
    • Serie 3 2005-2013 - What are the problems with the 184 hp BMW 3 Series engine? Read Answer
    • Serie 3 2005-2013 - What problems afflict the N47 engine of the BMW 3 Series? Read Answer
    • Serie 3 2005-2013 - What does the yellow engine fault warning light on the BMW E90 mean? Read Answer
    • Serie 3 2005-2013 - How much does it cost to replace the intake manifold gaskets on the BMW 3 series? Read Answer
    • Serie 3 2005-2013 - How much hp does the BMW 3 series E90 have? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos