Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Rear Bumper on BMW 3 Series

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

Is the rear bumper on your BMW 3 Series damaged and needs replacement? Here’s how to change it. Use a screwdriver to remove the fastening pins located at the back of the taillights after removing the trim pieces. Disconnect the wiring harness and remove the taillights.

Next, unscrew the bolts at the bottom of the bumper, then remove the screws located on the sides of the wheel well liners. Once the bumper is free of any screws or pins, grab it with your hands and pull it away from the body (disconnect any wiring if necessary).

Install the new bumper, screw in the bolts, and reattach the taillights.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of the BMW 3 Series
How to Remove the Rear Bumper of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) In this brief guide, you will find instructions to remove and replace the rear bumper of the BMW 3 Series. First, open the trunk and start unscrewing…
Remove the Rear Bumper of a BMW 3 Series
Remove the Rear Bumper of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Remove the rear bumper of a BMW 3 Series, here’s how to proceed: Unscrew the mounting screws (with a screwdriver or cordless drill) of the rear light…
How to Remove the Rear Bumper of the BMW 3 Series
How to Remove the Rear Bumper of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Let's briefly review the instructions that will allow you to remove and replace the rear bumper of the BMW 3 Series in simple steps. First, unscrew t…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos