Do it yourself
| ||||
|
BMW Serie 3 - Video tutorial
Model: BMW Serie 3
E91, E90, E92
- Years 2005-2013 In this video tutorial we will see how to remove the belt tensioner of a BMW 3 Series with 3000cc engine. We open the engine hood and we go to loosen our belt tensioner with a ratchet wrench, so that we can remove our belt: once done we go to unscrew the belt tensioner bolt with a socket wrench in order to remove it, as shown in the video. So let's reassemble the new belt tensioner by screwing the bolt first by hand and then tightening with the wrench with the right tightening. Refit the new belt by loosening the belt tensioner to complete the job!
Posted on 20 December 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |