Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Bulb on BMW 3

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

Remove damaged bulbs on a BMW 3? Start by removing the front splash shield to access the bulb compartment. Use a screwdriver to unscrew the plastic cover at the bottom of the fender (plastic splash shield).

Remove the plastic cover. After removing the bulb holder, take out the damaged bulb and install a new one (same size and voltage).

Test the lights to ensure they work correctly. Perform this replacement on the front headlights to maintain the same type of illumination.

Secure the plastic cover under the front fender of the vehicle with the attached screws.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

Remove Front Headlight Bulb on BMW 3
Remove Front Headlight Bulb on BMW 3
BMW Serie 3 (2005-2013 / E92, E90, E91) Remove the front headlight bulb from a BMW 3? Let's go through the process of removing the damaged bulb. Open the hood and lift it. Locate the headli…
Replacing the Low Beam Headlight Bulb on a BMW 3 Series
Replacing the Low Beam Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Here are the instructions to remove and replace the low beam headlight bulb on a BMW 3 Series. To access the low beam bulb, remove the plastic cover …
Replacement of the front headlight bulb of the BMW 3 Series
Replacement of the front headlight bulb of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Following these simple steps, we will see how to disassemble and replace the low beam or high beam bulb of the front headlight of the BMW 3 Series. F…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos