Do it yourself
Frequently asked questions about cars and motorcycles

Removing Door Panel X5

Model: BMW X5 E70 - Years 2007-2013
Part: Door trim panel

Let's see how to remove the cover panel of the door on a BMW X5. Remove the plastic cover above the internal handle using a pry tool: unscrew the fastening screws located in the plastic handle. Remove the frame around the door opening lever to access the panel. Once all screws and plastic clips that secure the door are removed, pull the door panel away with your hands, disconnect any electrical connectors and release cables. Install a new panel (if damaged) or remove the components inside the door.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW X5 (1999-2006 / E53) To remove the rear door trim panel, start by removing the window switch, the trim piece along the handle area that is snap-fitted (use a plastic pry …
BMW X5 (1999-2006 / E53) Want to remove the door panel of your BMW X5 and don't know how? Let's go through the steps: disconnect the battery terminals, remove the plastic cov…
BMW X5 (2013-2018 / F15) After obtaining a small flathead screwdriver or (preferably) a plastic wedge, remove the cover that hides the side bolt of the door, then unscrew tha…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos