Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Door Panel on BMW X5

Model: BMW X5 F15 - Years 2013-2018
Part: Door trim panel

After obtaining a small flathead screwdriver or (preferably) a plastic wedge, remove the cover that hides the side bolt of the door, then unscrew that bolt. Similarly, remove the plastic piece at the top and disconnect its connector. Unscrew the T20 Torx screw located in the door pocket, then those located at the bottom of the door. When you pull out the panel, work slowly and use a plastic trim tool to remove it gradually from its seat. Meanwhile, ensure that you have disconnected all the cables. This is a fairly simple operation.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW X5 (2007-2013 / E70) Let's see how to remove the cover panel of the door on a BMW X5. Remove the plastic cover above the internal handle using a pry tool: unscrew the fas…
BMW X5 (2007-2013 / E70) How do you replace the damaged leather interior door handle on a BMW X5? Use a pry tool to remove the plastic cover above the interior handle, then u…
BMW X5 (1999-2006 / E53) How to remove and replace the door handle on a BMW X5? Use a screwdriver to remove the screws located in the door as shown in the video. Then, discon…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos