Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X5
    4. : Remove the door panel of your BMW X5

BMW X5 - Video tutorial

Model: BMW X5 E53 - Years 1999-2006
Part: Door panel
Operation: Remove the door panel of your BMW X5

Do you want to remove the door panel of your BMW X5 and do not know how to do it? Let's see together in this video how to proceed: let's disconnect the battery terminals, remove the plastic cover with a lever, unscrew the screws placed inside it and in the inside door handle, being careful not to scratch it. We detach the door panel, unhook the clamps of the window lifters and speakers. Now that we have removed the door panel, we can mount the new panel or do some maintenance inside. We replace the piece and reassemble everything going backwards.


Posted on 2 November 2023 by ScegliAuto



How to change the door handle on BMW X5
BMW X5 (1999-2006 / E53) Does the door handle of a BMW X5 need to be replaced? Let's see how it disassembles. We remove the panel from the door (we unscrew all the fastening
How to remove the handle on BMW X5 Series
BMW X5 (1999-2006 / E53) How to remove and replace the door handle on a BMW X5 Series? Using a screwdriver, unscrew the tightening screws placed in the door as shown in the v
BMW X5 E53 loudspeaker replacement
BMW X5 (1999-2006 / E53) Let's see how to disassemble and replace the speaker of a BMW X5 E53 first series, following these simple steps. First we open the front door and we

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos