Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel

Model: BMW X5 E53 - Years 1999-2006
Part: Door trim panel

To remove the rear door trim panel, start by removing the window switch, the trim piece along the handle area that is snap-fitted (use a plastic pry tool and pull it back after releasing it); unscrew the screws located beneath the trim, disconnect the cable connected to the opening lever by pushing it backward, and pry along the edges of the panel to release the snap clips, being careful not to break them. Then, pull the panel away by sliding the lock and disconnecting the connector attached to the speaker.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Door Panel X5
Removing Door Panel X5
BMW X5 (2007-2013 / E70) Let's see how to remove the cover panel of the door on a BMW X5. Remove the plastic cover above the internal handle using a pry tool: unscrew the fas…
Removing the Rear Sunshade
Removing the Rear Sunshade
BMW X5 (1999-2006 / E53) The rear door panel integrates a sunshade that can be opened as needed since it operates with a roll-up system capable of automatically rewinding the…
Instructions for Removing the Power Window Mechanism
Instructions for Removing the Power Window Mechanism
BMW X5 (1999-2006 / E53) To remove the rear power window mechanism, you must first take off the door panel. Before starting to remove the panel, you need to detach the suppor…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos