Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel on BMW 3 Series

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

Using a plastic trim tool or a small flathead screwdriver, detach the protective plastic around the inner handle. Next, remove the two exposed Torx screws.

Take off the cover for the window switch and disconnect its connector. Again, using a trim tool or flathead screwdriver, pry around the panel to detach it from its location.

Finally, disconnect the various connections. For reassembly, reverse the steps: connect the wires to the new panel and snap it into place, reposition the window switch cover, and reinstall all the pieces.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

Disassembly of the front door panel of the BMW 3 Series.
Disassembly of the front door panel of the BMW 3 Series.
BMW Serie 3 (2012-2019 / F31, F30) In a few simple steps, we will see the process of disassembling the front door panel of the BMW 3 Series. First, we open the front door of the car an…
Removing the Door Panel of the BMW 3 Series
Removing the Door Panel of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Today's instructions will show you the procedure for removing and replacing the front door panel of the BMW 3 Series. First, get inside the vehicle a…
How to Remove the Door Panel of a BMW 3 Series?
How to Remove the Door Panel of a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you begin, open the door of your BMW 3 Series. Start by prying and removing the inserts from the door panel using a thin but sturdy tool. Once…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos