Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on BMW 3 Series E90 320d

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Service warning light

In this video, see the instructions to reset the service light for the regular oil change maintenance on a BMW 3 Series E90. First, get inside the vehicle and turn on the ignition by pressing the button; then, the service light will appear on the dashboard. Next, press the button located near the tachometer for about four seconds; now, use the control on the turn signal lever to scroll until you reach the oil light. At this point, press the center button to perform the reset!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2005-2013 / E91, E90, E92) To reset the oil change service light on a BMW 320 Series E90, follow this procedure: open the driver’s door and access the driver’s seat. Press the …
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, learn how to remove and replace the glow plugs and the glow plug module on a BMW 3 Series 320d E90 engine. First, open the ho…
BMW Serie 3 (2005-2013 / E91, E90, E92) This guide shows how to remove the instrument cluster from the BMW 3 Series 320d E90. First, lower and fully extend the steering wheel. Next, using a…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos