Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the CCC on BMW 3 Series E92

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Air conditioner

In this video, you will see how to remove the CCC or climate control unit on a BMW 3 Series E92 by following these simple steps. First, get inside the car and remove the center dashboard panel using a very thin lever; then, once you disconnect the electrical connectors at the back, remove the climate control unit by unscrewing the securing screws. At this point, disconnect all their electrical cables, as shown in the video; then proceed with the replacement and reassembly, following the video tutorial to the end!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Disassembling the Thermostat on BMW 3 Series E90-E91-E92
Instructions for Disassembling the Thermostat on BMW 3 Series E90-E91-E92
BMW Serie 3 (2005-2013 / E91, E90, E92) In today's tutorial video, you will see the main instructions for disassembling and replacing the thermostat on a BMW 3 Series E90-E91-E92. First, op…
Removing Ignition Button BMW 3 Series E92
Removing Ignition Button BMW 3 Series E92
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, you will learn how to remove the ignition button of a BMW 3 Series E92. First, get inside the car and remove the plastic cove…
How to Replace the Air Filter on a BMW 3 Series E92
BMW Serie 3 (2005-2013 / E91, E90, E92) To change the air filter on your BMW 3 Series E92 (2005-2013), it only takes a few seconds. First, park the car safely and turn it off completely. On…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos