Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the steering angle sensor BMW 7 Series E65, E66

Model: BMW Serie 7 E66, E65, E67, E68, MK 4 - Years 2001-2008

Today we will see, in this video tutorial, how to remove the steering angle sensor of a BMW 7 Series E65 and E66, in very simple steps! First we get inside the car and with a screwdriver we unscrew the screw that we find under the steering wheel, in order to remove the front airbag: then disconnect its electrical connector. At this point we remove the central nut of the steering wheel, removing it with a socket wrench with extension and remove the latter; now we unscrew the torx screws to remove our steering angle sensor, as shown in the video tutorial.

Posted on 13 February 2021 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the BMW 7 Series E65 located?
Where is the fuse box of the BMW 7 Series E65 located?
BMW Serie 7 (2001-2008 / E66, E65, E67, E68, MK 4) If you own a BMW 7 Series e65 (year 2002-2008) and want to find out the steps to locate and access the fuses, then all you have to do is read the fol…
How to replace the key battery of the Bmw 7 Series E65
How to replace the key battery of the Bmw 7 Series E65
BMW Serie 7 (2001-2008 / E66, E65, E67, E68, MK 4) Let's find out in this video the step by step instructions to remove and replace the battery of the remote control of the BMW 7 Series E65 key. First…
To reset the service indicator of the BMW 7 Series E66.
To reset the service indicator of the BMW 7 Series E66.
BMW Serie 7 (2001-2008 / E66, E65, E67, E68, MK 4) If you own a BMW 7 Series e66 (year 2001-2008) and want to learn how to correctly perform a manual reset of the service light, just pay attention to …

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500X

Learn how to equip your car with universal roof bars. Universal roof bars are used on cars with and without roof rails (fixed bars secured to the car roof). Install the roof bar kit as shown in the video with the bars calibrated according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once the width of the anchoring brackets is adjusted, tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, apply the safety caps on your Fiat.

Watch the video!


by ScegliAuto

More videos