Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the BMW 7 Series E66

Model: BMW Serie 7 E66, E67, E68, E65, MK 4 - Years 2001-2008
Part: Service warning light

If you own a BMW 7 Series E66 (2001-2008) and want to learn how to correctly perform the manual reset of the service light, pay attention to the following guide and follow all the steps described. First, insert the key and turn on the ignition. Immediately after, press and hold the button located at the top of the dashboard, to the left of the speedometer, for a few seconds. Release the button as soon as the new menu appears and ensure that the first option in the list is selected. Finally, press and hold the same button again until the reset is complete.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Steering Angle Sensor from BMW 7 Series E65, E66
Removing the Steering Angle Sensor from BMW 7 Series E65, E66
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) Today, we will see in this video tutorial how to remove the steering angle sensor from a BMW 7 Series E65 and E66 in very simple steps! First, get in…
How to Reset the Tire Pressure Sensors on the BMW 7 Series
How to Reset the Tire Pressure Sensors on the BMW 7 Series
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) This guide provides instructions to reset the tire pressure sensors on the BMW 7 Series. Before resetting the TPMS warning light, ensure all four tir…
Where Are the Fuses Located in the BMW 7 Series?
BMW Serie 7 (2001-2008 / E66, E67, E68, E65, MK 4) The fuses for the BMW 7 Series are located in two fuse boxes installed within the vehicle. The first is positioned inside the cabin, behind the glove…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos