Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fan Switch on BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Radiator

Today, locate the switch connected to the radiator fan on the BMW 3 Series E90. To access it, you will have a lengthy task, as you must first disassemble the front of the car, starting from the bumper and reaching the radiator fan (you will also need to drain the coolant). For these maintenance tasks, refer to other tutorials. Once you have done this, you will finally notice the connector shown in the video: it is located on the intake air duct leading to the aforementioned fan. At this point, extract the connector by pressing the appropriate tab, and then you can remove the switch by pressing it on the sides.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the A/C Fan on BMW 3 Series
Replacing the A/C Fan on BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Replacing the A/C fan on a BMW 3 Series? Open the hood and start removing the plastic cover under the windshield. Use a screwdriver to remove the scr…
How to replace the cabin fan of the BMW 3 Series 330i
How to replace the cabin fan of the BMW 3 Series 330i
BMW Serie 3 (1998-2006 / E46) Today's main instructions will show us how to disassemble and replace the blower motor of the BMW 3 Series 330i. First, we open the car's hood and lo…
Removing the Cabin Fan on a BMW 3 Series
Removing the Cabin Fan on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Remove the fan on a BMW 3 Series. Open the hood, and use a pry tool to remove the plastic cover under the windshield. Use a screwdriver to remove the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos