Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Handle Grip on BMW 3 Series E90

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Handle

See other generations:
This video is currently unavailable

Today, learn how to remove and replace the inner door handle grip on a BMW 3 Series E90, a component exposed to normal wear from sunlight and friction. First, get inside the vehicle and start by prying off the plastic cover of the handle; then, unscrew all the mounting screws found on the panel to remove it, as shown in the video.

At this point, disconnect the speaker wires and remove the plastic clips of the handle grip to take it off and replace it with the new one, following the video until the end!


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to Replace the Inner Door Handle on BMW 3 Series E90
How to Replace the Inner Door Handle on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video, see how to disassemble and replace the inner door handle on a BMW 3 Series E90, following the instructions below. First, open the fron…
Removing Door Panel on BMW 3 Series E90
Removing Door Panel on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video tutorial, you will learn how to remove the door panel of a BMW 3 Series E90. First, open the front door and remove the plastic trim by …
How to Replace the Door Handle on the BMW 3 Series
How to Replace the Door Handle on the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) These brief and simple instructions will show you the procedure for removing and replacing the inner door handle of the front door on the BMW 3 Serie…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos