Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the inside door handle on BMW 3 Series E90

Model: BMW Serie 3 E92, E90, E91 - Years 2005-2013
Part: Handle

Let's see in this video how to remove and replace the internal door handle on a BMW 3 Series E90, following the instructions below. First we open the front door and start by removing the lower plastic cover from the armrest, levering the sides; then unscrew the panel screws and lever the sides to remove it, disconnect the electrical cables on the back. At this point we remove the plastic clips of our handle, in order to remove it; we just have to replace it with the new one, applying the reverse disassembly procedure!

Posted on 24 May 2021 by ScegliAuto

Video tutorial

Related tutorials

How to remove the door handle on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) Today we will see how to remove and replace the internal grip handle of the front door on a BMW 3 Series E90, a component exposed to normal wear from…
How to replace the door handle of the BMW 3 Series
How to replace the door handle of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) These short and simple instructions will show us the process of disassembling and replacing the interior handle of the front door of the BMW 3 Series…
How to Remove the Interior Handle of a BMW 3 Series
How to Remove the Interior Handle of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Remove the interior handle (right front) on a BMW 3 Series: disconnect the battery terminals, use a screwdriver to remove the screws located in the u…

How to Remove the Left External Wing Mirror of a Volkswagen Polo

Let's see how to remove the left external wing mirror of a Volkswagen Polo (driver's side): remove the door panel (if necessary); use a lever to remove the internal trim of the mirror (there are plastic clips) and undo the securing bolts with a socket wrench. Once the securing bolts are removed: take out the mirror along with the adjustment electrical cables (manual wires) from the car door. To reassemble: refit the mirror with the bolts, the adjustment cables, and the plastic trim into the door panel. Finally, test the correct operation of the mirror.

Watch the video!


by ScegliAuto

More videos