Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on BMW 530d (G30)

Model: BMW Serie 5 G30 - Years 2017-2024
Part: Warning light – error code

When you perform the replacement of fluids and filters necessary for scheduled maintenance on your BMW G30 5 Series Diesel, you need to reset the counter on the instrument cluster, which indicates the miles to be driven until the next service. To do this: press the "START" button, use the button on the lower left of the dial to display all messages until you see only the total miles driven. At this point, release and press the button again; a pop-up will appear saying "engine oil - reset available". Release and press the same button again, and you will see the message "perform the reset?" Hold it down until you see the message "reset completed" on the instrument cluster.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of a BMW 530d
How to Replace the Key Battery of a BMW 530d
BMW Serie 5 (2017-2024 / G30) In this video, you will learn how to change the key battery of a BMW 530d. Start by extracting the key; once you have removed it, insert it into the …
Resetting the service of a BMW 5 Series G30
Resetting the service of a BMW 5 Series G30
BMW Serie 5 (2017-2024 / G30) Today we will see how to reset the service on a BMW G30. Let's start the operation by quickly pressing the car's ignition button three times to turn …
Service Reset on a BMW 5 Series G30
Service Reset on a BMW 5 Series G30
BMW Serie 5 (2017-2024 / G30) Today, let's see how to reset the service on a BMW 5 Series G30. Start the procedure by quickly pressing the ignition button three times to turn on t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos