Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio Display from a BMW 3 Series

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Car stereo

Before you begin, sit in the driver's seat of your BMW 3 Series. Start by prying out and removing the center insert of the dashboard along with the air vents, then disconnect the electrical connector. Next, remove the screws securing the climate control buttons, then pull out the button panel and disconnect the electrical connectors. After that, remove the screws that secure the radio display to the dashboard. At this point, pull the display base from its housing, and finally disconnect the electrical connectors. Once you complete this step, you will have finished the disassembly.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the original radio of the BMW 3 Series
How to remove the original radio of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today's step-by-step instructions will show us how to disassemble and replace the stock radio of the BMW 3 Series. First, we get into the car and sta…
How to Remove the Display in a BMW 3 Series?
How to Remove the Display in a BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) In this tutorial, you will see how to remove the display in a BMW 3 Series F30, a very simple operation. Start by disconnecting the negative terminal…
How to dismantle the car radio of the BMW Series 3.
How to dismantle the car radio of the BMW Series 3.
BMW Serie 3 (2005-2013 / E91, E90, E92) The instructions provided in this guide will allow us to remove and replace the stock radio of the BMW 3 Series. First, we get inside the vehicle and…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos