Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to disassemble the fuel pump of a BMW 3 Series

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Fuel pump
Operation: How to disassemble the fuel pump of a BMW 3 Series

Let's see how to disassemble and replace the fuel pump of a BMW 3 Series. To begin, we disconnect the battery cables, then, we remove the rear seat seat from the car. We remove the seats of the rear seats; unscrew the tightening nuts of the metal cap and remove it away. We wrap the entire perimeter of the sheet with absorbent paper or cloth, then, with a screwdriver, unscrew the large bolt placed around the pump. Disconnect the power supply terminals and the liquid circulation tubes. Finally we extract the floating fuel pump from the tank. To carry out the assembly we continue backwards.


Posted on 17 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Serie 3 2005-2013 - Why is the BMW 320d diesel pump not working? Read Answer
    • Serie 3 1998-2006 - How to solve the problem with the fuel pump in the BMW 3 Series? Read Answer
    • Serie 3 1998-2006 - Where is the fuel pump of a BMW 3 Series located? Read Answer
    • Serie 3 1998-2006 - Where is the diesel pump of the BMW 3 Series E46? Read Answer
    • Serie 3 1998-2006 - Where is the diesel pump of the BMW 320d E46? Read Answer
    • Serie 3 2005-2013 - Where is the fuel pump of the BMW 320 located? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos