Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Discs on BMW 5 Series E39

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Brake rotors

In this video tutorial, you will see how to remove and replace the rear brake discs and pads on the BMW 5 Series E39, second generation. First, lift the vehicle and start by removing the rear wheel; then remove the pad retaining clip by prying it with something thin on the sides, and unscrew the bolts securing the brake caliper, as shown in the video. At this point, unscrew the caliper bracket bolts and then unscrew those of the disc to remove and replace it; then reassemble everything, following the video to the end!

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Brake Rotors and Pads on BMW 5 Series E39
Replacing Brake Rotors and Pads on BMW 5 Series E39
BMW Serie 5 (1988-1995 / E34) In this practical video tutorial, learn how to replace the rear brake rotors and pads on the fantastic BMW 5 Series E39. First, lift the car and remo…
Replacing the Door Seal on a BMW 5 Series E39
Replacing the Door Seal on a BMW 5 Series E39
BMW Serie 5 (1995-2003 / E39) In this video tutorial, you will learn how to disassemble and replace the old, worn rubber door seal on the front door of a BMW 5 Series E39 by follo…
How to Remove the Rear Seats on a BMW 5 Series
How to Remove the Rear Seats on a BMW 5 Series
BMW Serie 5 (1995-2003 / E39) This brief and simple guide explains the steps to remove the rear seats and bench of a BMW 5 Series. First, open the rear door and lift the bench to …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos