Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time in a BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Clock

In this video tutorial, you will see how to set the time in a BMW 3 Series E90, as the car does not have automatic synchronization. Starting from the time on the instrument cluster, turn the key without starting the engine and use the arrows on the left stalk to scroll through the display until you find the time setting option. Press the "BC" button to confirm your selection, and continue using the arrows to change the hour. With the "BC" button, you can move to the minutes and confirm the setting once finished. At this point, both the time on the instrument cluster and in the radio will be set.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time in the BMW 3 Series?
How to Set the Time in the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) In this tutorial, you will see how to set the time in the BMW 3 Series, a very simple and quick operation to perform if you have replaced the battery…
How to Set the Time in a BMW 3 Series?
How to Set the Time in a BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) .. In this tutorial, you will see how to set the time in a BMW 3 Series, a very simple and quick operation to perform, for example, after.. …
How to Set the Time on the BMW 3 Series
How to Set the Time on the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Below, we will see how to adjust the time on the instrument cluster of the BMW 3 Series by following these simple steps. First, get inside the vehicl…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos