Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Test the Camshaft Sensor on a BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Crankshaft position sensor

See other generations:
Video tutorial

To test the camshaft sensor on a BMW 3 Series, completely remove the front part of the car by taking off the bumper for easier access to the engine. The camshaft sensor is located at the front of the engine.

To test it, start the engine by turning the key. Now, locate the ground wire in the connector and the Y sensor wire: by connecting a voltmeter to these two wires, you should read a potential difference of about 12 V. If the voltmeter shows the expected result, it means the sensor is functioning correctly.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Replace the Camshaft Position Sensor on a BMW 3 Series
How to Replace the Camshaft Position Sensor on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, we will look at the instructions that will allow you to remove and replace the camshaft position sensor on a gasoline BMW 3 Series. Fi…
Instructions for Disassembling the Camshaft on BMW 3 Series 330i E46
Instructions for Disassembling the Camshaft on BMW 3 Series 330i E46
BMW Serie 3 (1998-2006 / E46) In this video, you will see how to disassemble the camshaft from the cylinder head on a BMW 3 Series 330i E46; in this case, we will only cover the s…
How to Remove the Camshaft Position Sensor on the BMW 3 Series?
How to Remove the Camshaft Position Sensor on the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) In this tutorial, you will see how to remove the camshaft position sensor on the BMW 3 Series E90, a very simple operation. First, remove the entire …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos