Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X5
    4. : How do you replace the fuel filter on the BMW X5?

BMW X5 - Video tutorial

Model: BMW X5 E70 - Years 2007-2013
Part: Diesel filter
Operation: How do you replace the fuel filter on the BMW X5?

In order to replace the fuel filter of the BMW X5, it is necessary to access the lower part of the vehicle, in correspondence with the driver's seat, and loosen the 8 mm and 10 mm screws that secure the plate in this position. By removing the protective plate, you will have to unscrew the bolts securing the central panel, under which the fuel filter is located. This will have to be removed from its housing after having disconnected the pipes and loosening the fixing bolts. The new spare part can therefore be positioned in its housing, fixed with the appropriate bolts and connected to the pipes.


Posted on 17 March 2024 by ScegliAuto



Replacing the fuel filter on a BMW X5
BMW X5 (2007-2013 / E70) Replacing the fuel filter on a BMW X6, we see the removal of the filter placed under the car frame. We lift the car on a column bridge, locate the fu
How do you open the fuel door of the BMW X5?
BMW X5 (2019-2024 / G18, G05) On the BMW X5, in order to open the fuel door, you will need to press the appropriate button located inside the cabin, on the lower left side of the
How do you open the fuel door of the BMW X5?
BMW X5 (2019-2024 / G18, G05) To open the fuel door of the BMW X5, it is not necessary to press any unlock button from inside the cabin, but simply leave the key in its slot: this

    Frequently Asked Questions

    • X5 2007-2013 - Where is the BMW X5 diesel filter located? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos