Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil in a Car

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Engine oil

See other generations:
Video tutorial

To start this operation, wear protective clothing. Then, unscrew the oil cap located on the engine head and remove the dipstick to check the oil level.

Removing the cap and dipstick helps the oil drain out. You need to empty the oil pan by unscrewing the plug at the bottom and letting the oil flow into a container. While the oil is draining, you can remove the paper filter located inside a paper holder, assembled with the engine block.

In addition to this operation, you can also remove the air filter at the same time. Once these operations are completed, you can add new oil, but before doing so, make sure to screw in the plug that closes the oil pan. After that, pour the oil through the opening on the engine head, insert the dipstick to check the level, and screw the cap back on.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

When to Change Power Steering Fluid
When to Change Power Steering Fluid
BMW Serie 5 (1995-2003 / E39) Cars equipped with power steering have a reservoir that contains the fluid needed to lubricate the gears. If the car consumes too much fluid, it can …
Changing Your Car's Oil Filter
Changing Your Car's Oil Filter
BMW Serie 5 (2003-2010 / E60, E61) The oil filter is one of the most important components to consider in your car's maintenance. Each time you change the engine oil, you must also chan…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
BMW Serie 5 (1995-2003 / E39) Lift the vehicle with appropriate jacks and secure it with suitable supports to prevent it from falling. Place a plastic sheet and an oil catch pan u…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos