Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the "Service" Light on a BMW X5

Model: BMW X5 E53 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Service warning light

See other generations:
Video tutorial

Start by pressing the button near the fuel gauge, while activating the instrument cluster without starting the engine. After a few seconds of holding the button with the cluster on, the lower display will show "Reset SIA: -1312 1". Once this message appears, press the same button again until the word "Reset" starts to flash.

At this point, press the button one more time, and instead of "Reset," the word "End" will appear. When this word shows up, you have successfully completed the reset.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

BMW X5 (2007-2013 / E70) This video shows the procedure to reset the service light on the BMW X5 E70. The procedure takes only a few seconds and does not require any specific…
BMW X5 (2019-2026 / G05, G18) Today, you will learn in this brief and simple guide the procedure to reset the service light for the routine maintenance oil change on the BMW X5. F…
BMW X5 (2013-2018 / F15) In this video tutorial, you will see how to reset the service light on a BMW X5 by following a few simple steps: when you turn on the instrument clus…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos