Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Transmission Case of the BMW X3

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Transmission

In this guide, follow the main steps to remove the transmission case of the BMW X3. First, lift the vehicle and start by disconnecting and removing the exhaust system by unscrewing the bolts from the manifolds. Next, unscrew the bolts from the driveshaft bracket, disconnecting it from the transmission, and then drain the oil. At this point, unscrew the bolts of the transmission while supporting it with a jack; then lower it from the vehicle to remove it, applying the reverse procedure for reinstallation!

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW X3 (2003-2010 / MK 1, E83) In today's tutorial video, you will see the main instructions for removing and replacing the transfer case on the BMW X3 E83. First, lift the vehicle…
BMW X3 (2003-2010 / MK 1, E83) Today's guide will illustrate the main steps for removing and replacing the transmission of the BMW X3. First, lift the vehicle and start disconnecti…
BMW X3 (2010-2017 / MK 2, F25) On vehicles with automatic transmission, it often happens that it gets stuck in the P (Park) position, and the BMW X3 is no exception. In emergency s…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos