Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Oil Heat Exchanger from the BMW 1 Series with N47 Engine

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the oil heat exchanger on the BMW 1 Series with the N47 engine, open the bonnet to access the intake manifold. This will allow you to disconnect the water pump connector, giving you access to the six screws that secure the oil heat exchanger.

Once these six screws are loosened, you can remove the oil heat exchanger and replace it with a new spare part. After the replacement, refit all the components you removed.


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Recognise the Noise of the Timing Chain on a BMW 1 Series 120D N47
How to Recognise the Noise of the Timing Chain on a BMW 1 Series 120D N47
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this short video, you will understand how and when to notice the noise of the timing chain on the first generation BMW 1 Series, particularly on t…
How to Check the Oil Level of the BMW 1 Series?
How to Check the Oil Level of the BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To check the oil level of the BMW 1 Series, turn on the instrument cluster by inserting the key into the ignition and pressing the relevant button. O…
How to replace the oil filter and engine oil of the BMW 1 Series
How to replace the oil filter and engine oil of the BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today we will independently replace the oil filter and engine oil of the BMW 1 Series model E87. To perform the oil replacement, we must pour the pre…

    Frequently Asked Questions

    • Serie 1 2011-2019 - What is the cost for a BMW 1 Series MOT? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos