Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Serie 1
  6. : How to reset the brake change warning light in the BMW 1 Series?

BMW Serie 1 - Video tutorial

Model: BMW Serie 1 MK 1, E87, E81, E82 - Years 2004-2013
Part: Checks and maintenance
Operation: How to reset the brake change warning light in the BMW 1 Series?

In this tutorial we can see how to reset the brake change light in the BMW 1 Series. This simple operation must obviously be carried out only after having changed the pads according to the methods provided for in the manual. To do this, we turn on the instrument panel and enter the maintenance menu, holding down the TRIP button located just below the speedometer. Subsequently, using the directional arrows located at the extreme of the left lever, scroll through the various services until you find the one relating to the pads and hold down the BC button to complete the reset.


Posted on 15 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Serie 1 2011-2019 - How much does it cost to replace the timing chain on a BMW 1 Series? Read Answer
    • Serie 1 2011-2019 - What does the tire pressure warning light on the BMW 1 Series indicate? Read Answer
    • Serie 1 2004-2013 - What does the tire pressure indicator light on the BMW 1 Series indicate? Read Answer
    • Serie 1 2011-2019 - What are the indicators of the BMW 1 Series? Read Answer
    • Serie 1 2011-2019 - What are the dashboard indicators on the BMW 1 Series? Read Answer
    • Serie 1 2004-2013 - Why won't the fuel tank flap of the BMW 1 Series E81 close? Read Answer
    • Serie 1 2011-2019 - Why did the engine malfunction light turn on in the BMW Series 1? Read Answer
    • Serie 1 2011-2019 - Bmw Serie 1 f20, what is the most frequent problem? Read Answer
    • Serie 1 2011-2019 - What problems can a BMW 1 Series have when starting? Read Answer
    • Serie 1 2004-2013 - What problems does the BMW 1 Series have when starting? Read Answer
    • Serie 1 2004-2013 - What warning lights are there, in the BMW E87? Read Answer
    • Serie 1 2011-2019 - Where is the BMW 1 Series outside temperature sensor located? Read Answer
    • Serie 1 2004-2013 - What are the BMW 1 Series warning lights? Read Answer
    • Serie 1 2011-2019 - What is the cost for a BMW 1 Series MOT? Read Answer
    • Serie 1 2011-2019 - What is the emergency call system fault in the BMW 1 Series? Read Answer
    • Serie 1 2011-2019 - What are the main problems of the BMW 120d F20? Read Answer
    • Serie 1 2019-2026 - Why is the tailgate on my BMW 1 Series stuck? Read Answer
    • Serie 1 2011-2019 - Why is the engine failure warning light on in the BMW 1 Series? Read Answer
    • Serie 1 2004-2013 - What does the warning light with a steering wheel and an exclamation mark mean in the BMW 1 Series? Read Answer
    • Serie 1 2011-2019 - What does the message "Full power of the powertrain not available" mean in the BMW 1 Series? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos