Do it yourself
| ||||
|
BMW Serie 1 - Video tutorial
Model: BMW Serie 1
E87, E82, E81, MK 1
- Years 2004-2013 To be able to reset the brake wear warning light on the BMW 1 Series, insert the key and turn it to turn on the instrument panel: once the instrument panel has been turned on, press the button located at the bottom left of the speedometer , until the front pad warning light appears. When this warning light appears, the same button must be held down until the warning light is reset; it will be necessary to carry out the same operation for the rear pads. When both warning lights have reset, you will see that the brake wear warning light will be off.
Posted on 17 December 2022 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.048
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |