Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the brake wear indicator on the BMW 1 Series?

Model: BMW Serie 1 F21, MK 2, F20 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

To reset the brake wear indicator on the BMW 1 Series, turn on the instrument cluster using the ignition button and press the button located at the bottom left of the display twice for about 5 seconds. An interface will appear with the car and various settings: using the same button, scroll through the menu until you reach the option for brake pad wear.

By holding the button on the left for two seconds, a loading bar will appear, at the end of which the reset will be completed. If the reset does not occur, short-circuit the wear sensor cable and repeat the operation.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to reset the brake wear warning light on the BMW 1 Series?
How to reset the brake wear warning light on the BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To reset the brake wear warning light on the BMW 1 Series, insert the key and turn it to switch on the instrument cluster. Once the cluster is on, pr…
How to reset the brake wear warning light on a BMW 1 Series?
How to reset the brake wear warning light on a BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To reset the brake wear warning light on a BMW 1 Series, first replace the brake pads that need changing. Once installed, enter the cabin, switch on …
How do you reset the brake wear indicator light on the BMW 1 Series?
How do you reset the brake wear indicator light on the BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To reset the brake wear indicator light on the BMW 1 Series, you need to turn on the instrument panel by inserting the ignition key into the correspo…

    Frequently Asked Questions

    • Serie 1 2011-2019 - How to reset the brake warning light on a BMW 1 Series? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos