Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Rear Window Seal

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Body

See other generations:
Video tutorial

To replace the rear window seal, first remove the corner segments at each corner. Then, carefully lift and pull out the actual seal with all necessary precautions.

You may use some tools to assist you, and do not perform this work on a car exposed to the sun with hot glass. Clean any adhesive residue before installing the new seal.

Optionally, spray some lubricant to help slide the seal into place more easily. Use a tool to push the seal as far in as possible against the rear window, leaving the appropriate gap between the seal and the body.

Now, reattach the lower part of the seal near the trunk lip.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Replacing the Rear Window Seal on the BMW 5 Series
Replacing the Rear Window Seal on the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) In this video tutorial, you will see the steps to remove and replace the rear window seal on the BMW 5 Series. First, move to the back of the vehicle…
Replacing the Rear Window Seal on the BMW 5 Series
Replacing the Rear Window Seal on the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Today, let's go over the necessary information to remove and replace the rear window seal on the BMW 5 Series. First, open the trunk and start removi…
How to Remove the Side Glass from the BMW 5 Series Door
How to Remove the Side Glass from the BMW 5 Series Door
BMW Serie 5 (1988-1995 / E34) In today's video, you will see the steps to remove and replace the side glass from the BMW 5 Series door, following the instructions below. First, op…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos