Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Car Radio

Model: BMW Serie 6 E64, E63 - Years 2003-2011
Part: Car stereo

To remove the CD and DVD reading unit of the car radio and navigation system located at the bottom of the central console, proceed as follows: extract the buttons (hazard lights and door lock) located at the centre of the two air vents, unscrew the screw underneath and remove the air vents; then unscrew the fixing screws of the climate control unit and pull it out along with the CD DVD reader frame. At this point, you can unscrew the relevant fixing screws of this unit and complete its removal.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of a BMW 6 Series
How to Remove the Front Door Panel of a BMW 6 Series
BMW Serie 6 (2003-2011 / E64, E63) The instructions in this guide will illustrate the procedure for removing the front door panel of a BMW 6 Series. First, open the front door of the v…
Replacement of the Front Trim
Replacement of the Front Trim
BMW Serie 6 (2003-2011 / E64, E63) The disassembly process is very simple and easy. The trim is held in place by four simple side clips. Using a special plastic tool, lever between the…
How to Remove the External Door Handle of a BMW 6 Series
How to Remove the External Door Handle of a BMW 6 Series
BMW Serie 6 (2003-2011 / E64, E63) Before you start, open the door of your BMW 6 Series. Pull and hold the external door handle. Meanwhile, unscrew and remove the screw that secures th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos