Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Serie 3
  6. : How to replace the license plate light on BMW 3 Series

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: License plate light
Operation: How to replace the license plate light on BMW 3 Series

Let's find out in this video tutorial how to change the rear license plate lights of a BMW 3 Series e91 produced from 2005 to 2013. Before starting, let's make sure that the car is completely off, now let's raise the trunk to be more comfortable to do the job, then we insert a screwdriver into the slot next to the light and pull to extract first one side, then the other of the lamp holder. At this point we extract the lamp holder from its housing and remove the bulb inside to be replaced as shown in the video. The procedure will be the same for both license plate bulbs.


Posted on 17 May 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos