Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Trim of a 2001 BMW 520d

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Checks and maintenance

See other generations:
Video tutorial

As shown in the video, the first thing to do to remove the trim on a 2001 BMW 520d is to remove the black trim from its housing. Do the same with the handle trim.

Remove the two retaining screws. Pull the door panel out with a light pressure outward and upward.

While holding the door, disconnect the connectors as shown in the video. Unscrew the screws holding the window control unit and remove the worn trim from its housing.

For the control unit, you need to unscrew the three screws and replace it with the new one. Reassemble everything by reversing the steps.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

Replacing Cabin Air Filter BMW 5 Series 520d
Replacing Cabin Air Filter BMW 5 Series 520d
BMW Serie 5 (2010-2017 / F11, F10) In this video tutorial, you will learn how to remove and replace the cabin air filter in a BMW 5 Series 520d. First, get inside the car and remove th…
Removing the Thermostat from BMW 5 Series E60 520d-530d
Removing the Thermostat from BMW 5 Series E60 520d-530d
BMW Serie 5 (2003-2010 / E60, E61) In this video tutorial, you will learn how to remove and replace the thermostat on the BMW 5 Series E60, in the 520d or 530d version. First, open the…
Guide to Replacing the Fuel Filter on the BMW 5 Series 520D
Guide to Replacing the Fuel Filter on the BMW 5 Series 520D
BMW Serie 5 (2010-2017 / F11, F10) This guide provides instructions to remove and replace the fuel filter on the BMW 5 Series 520D. First, raise the vehicle to locate and access the fu…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos