|
Do it yourself
| |||
| ||||
How do you change the brake oil of the BMW 3 Series?
Model: BMW Serie 3
E91, E90, E92
- Years 2005-2013
To be able to replace the brake oil of the BMW 3 Series, you must first of all drain the old fluid present inside the tank: therefore you have to open the hood and remove the cover immediately under the windshield on the driver's side. By inserting a syringe connected to a tube immersed in the tank it will be possible to aspirate all the old liquid and pour the new one. Subsequently, it will be necessary to connect the tube to the brake calipers and press the corresponding pedal, so that the last residues of the old fluid present inside the calipers come out.
Posted on 14 August 2022 by ScegliAuto
Video tutorial
Related tutorials
BMW Serie 3
(2005-2013 /
E91, E90, E92)
Let's find out how to reset the oil change routine maintenance service light on the BMW 3 Series E90 and 1 Series E87, following the instructions bel…
BMW Serie 3
(1998-2006 /
E46)
Brake reset on a BMW 3 Series? Let's see the light reset. We turn on the instrument panel and see the brake warning light on. We turn off the instrum…
BMW Serie 3
(2012-2019 /
F31, F30)
In order to change the oil in the automatic transmission of the BMW 3 Series, it is convenient to lift the car with the help of a bridge, so that the…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
