Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper

Model: BMW Serie 3 E36 - Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Rear bumper

See other generations:
Video tutorial

This video shows the removal of the rear bumper from a BMW 3 Series. With the trunk open, locate and unscrew the four 13 mm bolts that secure the inner cover of the trunk.

Then, remove the 8 mm screws that hold the inner lining of the rear bumper located near the wheels. Perform the same procedure on both sides.

Also, remove and keep the small 13 mm bolts located at the center of the trunk. Now you can start to pull the bumper out by grabbing it from the bottom and working on both sides.

It is best to perform this procedure with two people. Now, simply unscrew the plastic bolt that is still holding the bumper to the rest of the car and the screws of the brackets that connect the two parts.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Rear Bumper
Instructions for Removing the Rear Bumper
BMW Serie 3 (1998-2006 / E46) Before starting the removal of the rear bumper, it is recommended to lift the vehicle on proper jack stands and remove the rear wheels, and also to o…
Remove the Rear Bumper of a BMW 3 Series
Remove the Rear Bumper of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Remove the rear bumper of a BMW 3 Series, here’s how to proceed: Unscrew the mounting screws (with a screwdriver or cordless drill) of the rear light…
Replacement of Rear Bumper
Replacement of Rear Bumper
BMW Serie 3 (1998-2006 / E46) This guide explains the procedure for replacing the car's rear bumper. The procedure involves removing the retaining screws, replacing the part, and …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos