Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the BMW X1 Remote Battery?

Model: BMW X1 F48 - Years 2015-2022
Part: Key

To replace the battery in the BMW X1 remote, slide out the key along with the cover located on the top of the remote: you will need to press the side button of the device to do this. Once the key is removed, pry it out of its housing to detach the cover on the back of the remote. Under this cover, you will find the battery, which can be removed from its housing and replaced with a new replacement part. After replacing the battery, close the remote and insert the key.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery on a BMW X1?
How to Replace the Key Fob Battery on a BMW X1?
BMW X1 (2015-2022 / F48) To replace the key fob battery on a BMW X1, activate the switch located on the side of the fob to detach the key and the corresponding chrome cover o…
How to Replace the Key Fob Battery for the BMW X1?
How to Replace the Key Fob Battery for the BMW X1?
BMW X1 (2009-2015 / E84) To replace the battery in the BMW X1 key fob, pull the key out from the top of the device, removing the associated plastic part as well. This will al…
How to Replace the BMW X1 Remote Battery
How to Replace the BMW X1 Remote Battery
BMW X1 (2015-2022 / F48) In this video, you will learn how to replace the battery in the keyless remote for the BMW X1 SUV. Start by removing the small metal key by pressing …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos