Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Bmw 3 Series E46

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Battery

Today we will discover the main instructions that will allow us to disassemble and replace the battery of the Bmw 3 Series E46, in simple and quick steps. First of all we open the tailgate of the trunk and remove the upper shelf, thus accessing the battery compartment (which we find under the right side cover); then we are going to disconnect both battery terminals (positive and negative pole), unscrewing the nuts with a 10 mm socket wrench. At this point we unscrew the screw of the fixing bracket, which we find at the bottom; we lift and extract the battery, replacing it with the new one!

Posted on 16 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the key battery in BMW 3 Series E46
How to replace the key battery in BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) If the key of your BMW 3 Series e46 has suddenly stopped working due to a flat battery, don't worry because in our new mini guide we are going to fin…
Where is the fuse box of the BMW E46 located?
BMW Serie 3 (1998-2006 / E46) If you want to find out where the fuse box of your BMW 3 Series E46 is located, then all you have to do is read the following guide and follow all th…
How to replace the battery of the BMW 3 Series remote control
How to replace the battery of the BMW 3 Series remote control
BMW Serie 3 (1998-2006 / E46) Today we will explain how to replace the battery of the key of the BMW 3 Series model E46. To replace the battery, we need to have a cutter and a fla…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos