Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of the BMW 3 Series E46

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Key

If your BMW 3 Series E46 key suddenly stops working due to a dead battery, don't worry. In this quick guide, you will learn how to replace it safely and efficiently. First, locate the small cover on the back of the key and remove it. Next, unscrew the two screws with a Phillips screwdriver and take off the back cover. Finally, find the dead battery and replace it with a new, compatible one. Reattach the cover, and you're done.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Program the Key on BMW 3 Series E46 with Delphi DS 150
How to Program the Key on BMW 3 Series E46 with Delphi DS 150
BMW Serie 3 (1998-2006 / E46) Let's see how to use the Delphi DS 150 coding tool to program the key fobs for vehicles; in this case, we will focus on programming a key for a BMW 3…
How to Reprogram the Key of the BMW E46
How to Reprogram the Key of the BMW E46
BMW Serie 3 (1998-2006 / E46) This video shows the procedure to reprogram the key for your BMW 3 Series E46. The procedure takes less than 1 minute to complete. To reprogram the k…
How to Replace the Battery of the BMW 3 Series E46
How to Replace the Battery of the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) Today we will discover the main instructions that will allow us to remove and replace the battery of the BMW 3 Series E46 in simple and quick steps. …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos