Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a BMW X1

Model: BMW X1 F48 - Years 2015-2022
Part: Headlight bulb

To replace the headlight bulb on a BMW X1, open the access panel located in the inner fender cover by removing the retaining clips. Once the cover is removed, you can take off the circular protective cap of the headlight by disconnecting the connector underneath. This will allow you to pull the bulb out of its housing and connect the new one to the connector. Insert the new bulb into the headlight and close it with the circular cap and the inner fender cover.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a BMW X1?
How to Replace the Headlight Bulb on a BMW X1?
BMW X1 (2009-2015 / E84) To replace the headlight bulb on a BMW X1, open the hood to access the rear of the corresponding headlight. Here you will find the protective cover, …
How to replace the front headlight bulb of the BMW X1
How to replace the front headlight bulb of the BMW X1
BMW X1 (2009-2015 / E84) Today's instructions will show us the process of disassembling and replacing the low beam bulb of the front headlight of the BMW X1. To access the bu…
How to Replace the Headlight Bulb in a BMW X1?
How to Replace the Headlight Bulb in a BMW X1?
BMW X1 (2009-2015 / E84) Replacing the headlight bulb in the BMW X1 E84 is a straightforward task. First, access the wheel well on the side where you will replace the bulb an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos