Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Display in a BMW 3 Series?

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Car stereo

In this tutorial, you will see how to remove the display in a BMW 3 Series F30, a very simple operation. Start by disconnecting the negative terminal of the battery, then pry off the panel located below the radio with a plastic trim tool. Next, remove the entire vent panel, unscrew the screws from the radio console, and pull the entire module out of the housing. Once done, you can disconnect the display connector, unscrew the corresponding screws, and remove it from the dashboard. To install the replacement, simply follow the reverse procedure.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the BMW 3 Series?
How do you reset the tire pressure warning light on the BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) To reset the tire pressure warning light of the BMW 3 Series, you need to inflate the tires until they reach the recommended pressure value: this val…
Resetting the Brake Light on BMW 3 Series
Resetting the Brake Light on BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Resetting the brake light on BMW 1 Series and 3 Series, whether related to the fluid or brake pads, is extremely simple. Just start the car and press…
How to Set the Clock on a BMW 3 Series?
How to Set the Clock on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) To set the clock on a BMW 3 Series, insert the key and turn on the ignition. Next, press the MENU button located on the center console near the radio…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos