Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a BMW F30

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Air filter

See other generations:
Video tutorial

As shown in the video, to replace the cabin filter located on the passenger side under the glove compartment, you need to remove the two bolts securing the lower part of the dashboard. Once this is done, gently pull down the lower part of the dashboard with your fingers.

Carefully slide out the panel, and at this point, unscrew the two screws holding the cabin filter guide using a Torx 5 wrench. When you pull out the guide, as the video shows, the filter will come out easily.

Replace the worn filter with a new one, fit it into its place, and reverse all the steps.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

Replacing Cabin Air Filter on BMW 3 Series F30
Replacing Cabin Air Filter on BMW 3 Series F30
BMW Serie 3 (2012-2019 / F31, F30) In this video, follow the instructions to remove and replace the cabin air filter on a BMW 3 Series F30. First, access the inside of the car and loca…
How to Replace the Cabin Air Filter in the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) To replace the cabin air filter in the BMW 3 Series, model F30, follow these simple and quick steps. Get inside the vehicle and sit in the passenger …
How to perform the engine oil change warning in the BMW 3 Series f30?
How to perform the engine oil change warning in the BMW 3 Series f30?
BMW Serie 3 (2012-2019 / F31, F30) The maintenance of the BMW 3 Series f30 is carried out according to a specific maintenance program established by the manufacturer, based on kilomete…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos