|
Do it yourself
| |||
| ||||
How to Replace the Fuel Filter on BMW "5 Series" 520 I
Model: BMW Serie 5
E39
- Years 1995-2003
In this video tutorial, you can see how to replace the fuel filter on a BMW "5 Series" 520 I: the first thing to do is order a fuel filter from an authorized dealer (if you have a diesel engine, you need to order a diesel filter; if you have a gasoline engine, you will need a gasoline filter). Open the fuel tank cap, lift the car using a jack, and place safety stands under the vehicle. Using a 10 mm socket wrench, remove the fasteners of the underbody cover panel, then use an 8 mm socket wrench to remove the underbody cover; have a container ready to collect fluids; with a 5 mm socket wrench, remove the fasteners connecting the fuel supply line to the filter box; the next step is to disconnect the fuel lines. Use a H5 HEX wrench to loosen the fastener of the fuel filter; at this point, you can remove the old fuel filter and place the cartridge inside the container. Position the new fuel filter in place and reassemble the parts in reverse order.
Updated on 12 June 2026 by ScegliAuto
Video tutorial
Related tutorials
BMW Serie 5
(1995-2003 /
E39)
In this video tutorial, see how to replace the cabin air filter on a BMW 5 Series by following a few simple steps: First, purchase a new cabin air fi…
BMW Serie 5
(2003-2010 /
E61, E60)
How to replace the fuel filter on BMW 5 Series? Let's see how to remove and replace the fuel filter: Lift the car on a column lift, locate the fuel f…
BMW Serie 5
(2003-2010 /
E61, E60)
In this video tutorial, you will see how to replace the cabin air filter on a BMW 5 Series E60 by following a few simple steps: the first thing to do…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.134
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |