Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Transfer Case Oil on a BMW X3?

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Transmission fluid

To change the transfer case oil on a BMW X3, access the underside of the vehicle at the rear axle: here you will find the drain plug for the transfer case oil reservoir. By unscrewing this plug and placing a container underneath, you can collect all the used oil. Once it has completely drained, insert the new oil using a syringe. After the new oil is added, it is recommended to seal the plug with a torque of 44 lb-ft.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Repair the Transfer Case on the BMW X3 - X5
Guide to Repair the Transfer Case on the BMW X3 - X5
BMW X3 (2003-2010 / MK 1, E83) In this brief guide, you will see the main steps to disassemble and repair the transfer case on the first-generation BMW X3, as well as the X5. First…
How to Replace the Transfer Case Motor on a BMW X3
BMW X3 (2003-2010 / MK 1, E83) Here’s how to remove and replace the transfer case motor on a BMW X3: Lift the vehicle on a column lift, locate the transfer case as shown in the vid…
Replacing the Transfer Case on the BMW X3 E83
Replacing the Transfer Case on the BMW X3 E83
BMW X3 (2003-2010 / MK 1, E83) In today's tutorial video, you will see the main instructions for removing and replacing the transfer case on the BMW X3 E83. First, lift the vehicle…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos