Do it yourself
| ||||
|
BMW X3 - Video tutorial
Model: BMW X3
E83, MK 1
- Years 2003-2010 In today's video tutorial we will see the main instructions for disassembling and replacing the transfer case on the BMW X3 E83. First we lift the car and begin to disassemble our entire transmission, disconnecting the gear shaft and unscrewing all the bolts; then we drain the gear oil. At this point, once our transmission is down, we can go and disassemble our transfer case, unscrewing the bolts, which we find laterally; we replace the spare part with the new one and we go to reassemble everything on the transmission, following the video until the end!
Posted on 5 March 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.012
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |