Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Center Tunnel Cover

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Center console tunnel

To remove the cover of the center tunnel (which in this case has a wood finish), start by removing the leather shift boot, then take off the trim around the gear shift (where the automatic transmission symbols are located) by disconnecting the respective connectors; next, unscrew the mounting screws of the cover, including those under the armrest and under the parking light switch: then remove the center tunnel cover, being careful not to scratch it or break any plastic tabs.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly and Replacement of the Cabin Fan in a BMW 5 Series
Disassembly and Replacement of the Cabin Fan in a BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Here are step-by-step instructions to disassemble and replace the cabin fan in your BMW 5 Series. First, get inside the vehicle and begin removing th…
Removing the Center Tunnel Cover
Removing the Center Tunnel Cover
BMW Serie 5 (1995-2003 / E39) To remove the center tunnel cover, it is necessary to disassemble the armrest. With the help of a medium-sized flathead screwdriver, detach the glov…
Disassembly of the tunnel and central console of the BMW 5 Series.
Disassembly of the tunnel and central console of the BMW 5 Series.
BMW Serie 5 (2003-2010 / E61, E60) In this guide we will see the instructions that will allow us to disassemble and eventually replace the console and the central tunnel of the BMW 5 S…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos